Search

New Ceramics!

This section doesn’t currently include any content. Add content to this section using the sidebar.

This section doesn’t currently include any content. Add content to this section using the sidebar.

This section doesn’t currently include any content. Add content to this section using the sidebar.

This section doesn’t currently include any content. Add content to this section using the sidebar.

PC Assembly, Bundle of 100, 36" low flow

You have tried to enter more than we have in stock
58 in stock. Contact Us if you require more.
The PC assembly replaces your spaghetti tube to deliver the same flow rate from your Spot-Spitter even if there are pressure variations in your system, and to shut off when line pressure drops below 3 psi. This means that all Spitters turn on and turn off at the same time, and flow at the same rate. Water in your lines does not all drain into the pot at the lowest elevation on shutdown. The result: unparalleled uniformity along with the classic Spitter pattern. Use PC Assemblies for high-frequency irrigaiton, or if you need everything to run perfectly.

 

PC Assemblies require 25-60 PSI supply pressure. Check that your system supplies at least 25 psi. If your supply pressure is greater than 60 PSI we recommend using a 25 or 30 PSI pressure regulator.

 

Use low flow PC Assemblies with Gray, Brown, Orange or Light Green Spitters. Requires 25-60 PSI supply pressure.