The Olson EH-12 can be describd as a "drip system in a head". Each head contains twelve pressure-compensating emitter valves, distribution tube fittings, a method of opening or closing each outlet, a filter and fertilizer application capability. It threads directly onto a 1/2" NPT male riser to get up and running quickly. Built on Olson Vibra-Clean pressure compensating technology, each emitter will keep working reliably, even when used with challenging water sources.
Use Primerus 1/8" Spaghetti Tubing or Netafim SuperFlex Tubing to connect each outlet of your EH-12 to an Angle Barb Stake which inserts directly into each container to put water where you want it. The SuperFlex tubing is higher cost but more flexible than the Primerus Spaghetti Tube.
The Olson Vibra-Clean EH-12 is ideal for your indoor growing, small greenhouse or outdoor commercial application.
The Olson EH-12 1/2 GPH Pressure Compensating Bubbler supplies twelve 1/8" distribution tubes from a single 1/2" MPT riser.
The Olson EH-12 1/2 GPH Pressure Compensating Bubbler supplies twelve 1/8" distribution tubes from a single 1/2" MPT riser.
The Olson EH-12 1 GPH Pressure Compensating Bubbler supplies twelve 1/8" distribution tubes from a single 1/2" MPT riser.
The Olson EH-12 1 GPH Pressure Compensating Bubbler supplies twelve 1/8" distribution tubes from a single 1/2" MPT riser.
The Angle Barbed Stake holds a 1/8" microtube in place in your container. Use only for direct connection to a single barb-outlet PC Jr emitter or a Muti-Outlet PC Bubbler - use the Arrow Dripper if using a manifold. Grey color blends well with white tubing.
The Angle Barbed Stake holds a 1/8" microtube in place in your container. Use only for direct connection to a single barb-outlet PC Jr emitter or a Muti-Outlet PC Bubbler - use the Arrow Dripper if using a manifold. Grey color blends well with white tubing.
Primerus 1/8” polyethylene spaghetti tubing, 100 foot roll
Primerus 1/8” polyethylene spaghetti tubing, 100 foot roll